QIN XIN (HONG KONG) ELECTRONIC TECHNOLOGY CO.,LIMITED
Winning doesn't have to have capital, but to give up will lose
Add to Cart
application
1:1 standard current signal isolation, signal range 0(4)... 20 mA.
Standard DIN rail installation.
Both in terms of technology and cost, it is the choice of electrical isolation of current signals.
It can effectively suppress the surge current and protect the control system from the influence of signal noise and transient.
Eliminate the ground loop and measure the floating signal.
Install in safe Zone or Zone 2 and Cl. 1 Div 2.
Technical characteristics
The 3185 is driven only by current input signal without separate power supply.
Low input voltage drop, typical value 1,35 V + Vout.
< very high conversion accuracy, better than 0,1% signal range 0... 20, 5 mA.
Function range is 0... 23 mA, meaning that 3185 meets NAMUR NE43 standard requirements.
Input and output float and electrical are independent of each other.
The maximum output voltage is 17,5 VDC.
High electrical isolation performance 2,5 kVAC.
Fast response time < 5 ms.
Excellent SNR > 60 dB.
Mechanical specifications
Structure dimensions (H X W X D)
113 x 6,1 x 115 mm
Weight (approx.)
70 g
DIN rail type
DIN EN 60715/35 mm
Wire specifications
0, 13... 2,5 mm2 / AWG 26... 12 the winding
Screw terminal torque
0, 5 Nm
Vibration-proof specification
IEC 60068-2-6
2... 25 Hz
Plus or minus 1, 6 mm
25... 100 Hz
Plus or minus 4 g
